Best Way To Apply Furniture Stain
best way to apply furniture stain
Apply the stain to softwood. brushes with synthetic bristles are best for water-based stains, while brushes with natural bristles are best for oil-based stains like varathane or minwax. use brushes for large, flat surfaces. you will have to use a cloth for more intricately carved, hard to brush surfaces.. Less expensive than hard maple, birch is often substituted for maple in furniture and kitchen cabinets. but, like hard maple, birch wood does not absorb stain evenly and should not be stained with dark colored stains. when staining, first apply a pre-stain wood conditioner, then select stains lighter in color.. To stain furniture, use an oil based stain because it is less likely to streak. mix the stain thoroughly and apply it with a foam brush or soft rag. to make sure you leave a good finish, only keep a little stain on the brush at a time to prevent dripping, and make the final pass with the grain to prevent streaks..
best way to apply furniture stain
5. wipe off the excess stain using a clean cloth. allow the stain to dry 6 to 8 hours. 6. brush a coat of polyurethane varnish onto the surface, then finish up with long, light brush strokes to remove bubbles and lap marks. 7. on an old furniture piece, clean the surface with a soft cloth dampened with commercial wood cleaner. 8.. Use a rag, a soft sponge or a brush to apply the stain. move with the grain, not against it. the longer you leave the stain on, the darker the finish. note: stain is either oil- or water-based, although some hybrid products are available. water-based stains are nontoxic and clean up easily with water but have a tendency to cause streaking..
